The second dimension of Waste Steel Recycling segmentation concerns the material types that enter the processing stream. Shredded scrap, representing roughly 40 % of incoming volume, is produced by automated shear lines that reduce large off‑cuts into uniform particles, facilitating high‑throughput electric‑arc furnace operations. Turned scrap, accounting for about 30 %, originates from machining and machining‑center turnings; its relatively clean surface and defined geometry lower impurity levels, making it suitable for specialty alloy production. Heavy melt scrap, roughly 15 %, comprises thick plate and beam sections that require larger furnace ladles and longer melt cycles, yet generate higher‑value structural steel billets. Light melt scrap, contributing around 10 %, includes thin gauge sheet and coil that melt quickly and are often directed to thin‑gauge rolling mills. The residual mixed‑grade category, about 5 %, contains heterogeneous pieces that are sorted downstream or blended into lower‑specification grades. By quantifying each type’s proportion, analysts can assess feedstock availability, processing cost structures, and downstream price differentials, all of which are critical for accurate market sizing and forecasting.