Types of wafer inspection objectives are classified by the physical or logical characteristic they target. The primary type, Defect detection, subdivides into particle defect detection, which identifies foreign‑material contamination, and pattern defect detection, which captures lithographic anomalies such as line‑breaks or bridging; together they command the majority of equipment spend due to their direct impact on yield. Critical dimension (CD) measurement forms a second type, employing scatterometry or interferometry to verify line width and spacing against design rules, a capability essential for sub‑10 nm nodes. Overlay inspection is a third type, measuring the alignment between successive mask layers; its precision directly influences pattern fidelity and thus occupies a significant niche in multi‑pattern processes. A fourth, Pattern fidelity verification, evaluates the conformity of printed features to intended geometries, often using model‑based analysis. Each type adds a discrete revenue stream to the overall market, with defect detection alone representing roughly two‑thirds of total spend, while CD, overlay, and fidelity together account for the remaining third.