Types segmentation classifies PMC into functional families—press felts, dryer fabrics, Yankee dryer fabrics, and specialty coatings—each engineered for distinct process stages. Press felts, typically woven polyester or polypropylene, provide mechanical support during web consolidation and influence water‑removal efficiency; they dominate the tissue line where high‑speed presses are standard. Dryer fabrics, often non‑woven or coated with silicone, transfer heat and maintain web integrity in the drying zone, and their selection varies with dryer configuration (steam‑heated vs. hot‑air). Yankee dryer fabrics, a niche subset of coated felts, are indispensable for through‑dry tissue production, requiring a cured silicone surface to prevent web adhesion. Specialty coatings, such as PTFE‑treated or antistatic layers, address niche requirements like enhanced release or static control in both tissue and toilet‑paper lines. Collectively, these types represent approximately 70 % of the PMC market by volume, with press felts contributing the largest share due to their ubiquity across both application categories. Understanding the proportional weight of each type enables precise forecasting of raw‑material demand and equipment upgrade cycles within the overall market taxonomy.